OEM/ODM Factory Sizing A Braking Resistor - Crowbar/Chopper Resistor – Wepower
OEM/ODM Factory Sizing A Braking Resistor - Crowbar/Chopper Resistor – Wepower Detail:
█ Application
Crowbar resistor is mainly used in low voltage ride through technology of wind power inverter. It is used at the rotor side of wind turbine generator to bypass the rotor side converter. In case of low voltage disturbance in the power grid, the DC bus voltage and rotor current shall be prevented from being too high. It mainly works in fault state to damp stator flux linkage. Crowbar resistors can dissipate huge amounts of energy instantaneously.
It is mainly used in the frequency conversion / converter system of doubly fed variable speed constant frequency generator units to improve the low voltage ride through capability of generator units, which is limited by the power grid
Large current impact caused by voltage drop protects excitation converter and limits rotor winding over voltage.
█ Feature：
The resistance material is imported alloy steel, which can absorb large energy impact in a short time, and can meet different power requirements.
█ structures：
Mica sandwich structure, traditional metal carrier grid structure and block carrier structure:
1. mica sandwich structure, with small volume, low cost and large heat capacity, is suitable for absorbing large energy in a short time and for single impact at long intervals (once a week).
2. with the traditional metal grid structure, the product has relatively moderate volume, relatively moderate cost and good heat dissipation performance. It is suitable for multiple impacts in a short time (once every 30 minutes). It can be used in crowbar resistor, chopper resistor and braking resistor circuits.
3. block carrier structure, the product has strong impact resistance and good heat dissipation performance. High structural strength and moderate price. Suitable for short-time multiple impact. It can be applied to crowbar resistor, chopper resistor, braking resistor and other circuits.
█ Life Time of Crowbar Resistor
| 200J | 1 times/second | |
| 220KJ | 1 times/30mins | 35000 times（20 years of life） |
| 640KJ | 1 times/week | 1000 times（20 years of life） |
| 1360KJ | 1 times/month | 260 times（20 years of life） |
| Take 1.5MW windmill generator as an example, environment temperature ≤ 60℃ | ||
█ Resistor Material Comparison
|
Material |
（g/mm3） |
（Ω·mm2/m） |
J/(g·K) |
W/(m·K) |
ppm/℃ |
|
SUS304 |
7.9 |
0.72 |
0.5 |
13.2 |
≤1400 |
|
SUS316 |
7.93 |
0.78 |
0.45 |
13.23 |
≤900 |
|
SUS310S |
7.98 |
0.88 |
0.46 |
13.2 |
≤600 |
|
Cr20Ni80 |
8.4 |
1.09 |
0.441 |
16 |
≤100 |
█ Selection Table
|
Energy |
Resistance |
Time |
Dimension（mm） |
||
|
（L）mm |
(W)mm |
(H)mm |
|||
|
50KJ |
3R |
30mS |
420 |
160 |
95 |
|
200KJ |
2R |
3.8S |
285 |
178 |
150 |
|
500KJ |
3.3R |
3.8S |
670 |
150 |
150 |
|
1.0MJ |
0.36R |
0.1S |
395 |
190 |
153 |
|
1.5MJ |
0.45R |
3S |
520 |
292 |
100 |
|
2.0MJ |
0.4R |
30mS |
868 |
175 |
130 |
|
2.0MJ |
0.5R |
30mS |
943 |
195 |
135 |
|
2.2MJ |
0.7R |
1S |
446 |
240 |
153 |
|
2.5MJ |
0.95R |
3S |
597 |
400 |
200 |
|
3.0MJ |
0.7R |
1S |
432 |
240 |
153 |
Note: For other technical parameters & requirements， please contact with our company’s business man.
Product detail pictures:
Related Product Guide:
continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for OEM/ODM Factory Sizing A Braking Resistor - Crowbar/Chopper Resistor – Wepower , The product will supply to all over the world, such as: Armenia, Malta, Ecuador, We welcome you to visit our company & factory and our showroom displays various products and solutions that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to supply you with the best services. If you will need more information, please do not hesitate to contact us via E-mail, fax or telephone.
By Mary from Ghana - 2017.07.07 13:00
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Fernando from moldova - 2018.10.01 14:14
Products categories
-
OEM manufacturer Thermal Contact Resistance Ste...
-
Chinese Professional Aluminum Foil Temperature ...
-
18 Years Factory Dynamic Braking System Resisto...
-
Reasonable price for Metal Clad Braking Resisto...
-
Factory Outlets Chemical Resistance Chart For A...
-
Wholesale Dealers of Single Phase Load Bank - ...