Factory directly Prey Grounding Resistor Location - Crowbar/Chopper Resistor – Wepower
Factory directly Prey Grounding Resistor Location - Crowbar/Chopper Resistor – Wepower Detail:
█ Application
Crowbar resistor is mainly used in low voltage ride through technology of wind power inverter. It is used at the rotor side of wind turbine generator to bypass the rotor side converter. In case of low voltage disturbance in the power grid, the DC bus voltage and rotor current shall be prevented from being too high. It mainly works in fault state to damp stator flux linkage. Crowbar resistors can dissipate huge amounts of energy instantaneously.
It is mainly used in the frequency conversion / converter system of doubly fed variable speed constant frequency generator units to improve the low voltage ride through capability of generator units, which is limited by the power grid
Large current impact caused by voltage drop protects excitation converter and limits rotor winding over voltage.
█ Feature：
The resistance material is imported alloy steel, which can absorb large energy impact in a short time, and can meet different power requirements.
█ structures：
Mica sandwich structure, traditional metal carrier grid structure and block carrier structure:
1. mica sandwich structure, with small volume, low cost and large heat capacity, is suitable for absorbing large energy in a short time and for single impact at long intervals (once a week).
2. with the traditional metal grid structure, the product has relatively moderate volume, relatively moderate cost and good heat dissipation performance. It is suitable for multiple impacts in a short time (once every 30 minutes). It can be used in crowbar resistor, chopper resistor and braking resistor circuits.
3. block carrier structure, the product has strong impact resistance and good heat dissipation performance. High structural strength and moderate price. Suitable for short-time multiple impact. It can be applied to crowbar resistor, chopper resistor, braking resistor and other circuits.
█ Life Time of Crowbar Resistor
| 200J | 1 times/second | |
| 220KJ | 1 times/30mins | 35000 times（20 years of life） |
| 640KJ | 1 times/week | 1000 times（20 years of life） |
| 1360KJ | 1 times/month | 260 times（20 years of life） |
| Take 1.5MW windmill generator as an example, environment temperature ≤ 60℃ | ||
█ Resistor Material Comparison
|
Material |
（g/mm3） |
（Ω·mm2/m） |
J/(g·K) |
W/(m·K) |
ppm/℃ |
|
SUS304 |
7.9 |
0.72 |
0.5 |
13.2 |
≤1400 |
|
SUS316 |
7.93 |
0.78 |
0.45 |
13.23 |
≤900 |
|
SUS310S |
7.98 |
0.88 |
0.46 |
13.2 |
≤600 |
|
Cr20Ni80 |
8.4 |
1.09 |
0.441 |
16 |
≤100 |
█ Selection Table
|
Energy |
Resistance |
Time |
Dimension（mm） |
||
|
（L）mm |
(W)mm |
(H)mm |
|||
|
50KJ |
3R |
30mS |
420 |
160 |
95 |
|
200KJ |
2R |
3.8S |
285 |
178 |
150 |
|
500KJ |
3.3R |
3.8S |
670 |
150 |
150 |
|
1.0MJ |
0.36R |
0.1S |
395 |
190 |
153 |
|
1.5MJ |
0.45R |
3S |
520 |
292 |
100 |
|
2.0MJ |
0.4R |
30mS |
868 |
175 |
130 |
|
2.0MJ |
0.5R |
30mS |
943 |
195 |
135 |
|
2.2MJ |
0.7R |
1S |
446 |
240 |
153 |
|
2.5MJ |
0.95R |
3S |
597 |
400 |
200 |
|
3.0MJ |
0.7R |
1S |
432 |
240 |
153 |
Note: For other technical parameters & requirements， please contact with our company’s business man.
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Factory directly Prey Grounding Resistor Location - Crowbar/Chopper Resistor – Wepower , The product will supply to all over the world, such as: Singapore, Finland, Sheffield, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
By Agustin from US - 2018.12.28 15:18
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Phyllis from Venezuela - 2018.09.29 17:23
Products categories
-
Leading Manufacturer for High Impedance Groundi...
-
Free sample for Heat Resistant Aluminum Foil Ta...
-
OEM/ODM Supplier Resistor Not Connected To Grou...
-
Factory directly Prey Grounding Resistor Locati...
-
Manufacturer for Braking Resistors Calculation ...
-
Low MOQ for Copper Clad Aluminum Vs Copper Resi...